Product Description
Details
ZERO-X ATLAS DRONE, with WiFi and ONE BUTTON TAKE OFF
Razor sharp footage, laser accurate control
The Zero-X Atlas will record your flight in 1080P and transmit the live feed to your smartphone wirelessly. The built in barometric sensor and optical flow sensor keep flight stedy giving you stable footage.
Features
120 Metre Controllable Range Capture crystal clear full high definition video with the push of a button. |
|
High Definition 1080P Video Capture crystal clear high definition video with the push of a button. |
|
VR Compatible Use the Zero-X Atlas apps FPV live stream with your chosen VR headset. *VR Headset not included. |
|
Optical Flow Positioning Uses your video feed to stabilse your flight. |
|
Smart Remote If the Atlas is approaching the edge of the drones range, the remote will issue a warning beep. |
|
6 Axis Gyroscope Steady and responsive onboard gyroscopic stabilisation system. |
|
WiFi FPV See the world from Atlas’ perspective via the built in WiFi camera. |
|
1000 mAh Battery Allows up to 15 minutes of recording on a single charge. |
Technical Specifications
Additional Information
Battery Information | 1200mAh |
---|---|
Tactile Controller | Included |
Dimensions | 37cm x 37cm x 9cm |
Camera | Yes |
Resolution | 1080P |
LCD Display | Yes |
Speed Modes | 2 |
360 Flip | Yes |
Flight Time | 15 Mins |
Range | 120M |
Frequency | 2.4Mhz |
SD Card | Up to 32GB |
Power source | 1200mAh |
Product Dimensions (mm) | 370 mm x 370 mm x 90 mm (including rotor guards) |
Box Content | Atlas Drone 1 USB Wall Charger 1 Remote Control 1 Spare Rotor Blades 4 Drone Battery 1 Screwdriver 1 Drone Battery Charger 1 Manual 1 |
Boxed Dimensions (mm) | 320mm (h) x 350mm (w) x 115mm (d) |
Boxed Weight (kg) | 830grams |
Support
FAQ'S
Frequently Asked Questions
Got questions about our Zero-X drones and accessories? We might just have the answer you’re looking for in our FAQ’s below. You can also download our operational manuals on each drone product page. If you’re looking for more information, please feel free to contact us in the Zero-X control tower right here[TAL1] .
ATLAS
Q1: How do I connect my Atlas drone to the remote control?
A1: Before attempting to set up your Atlas drone ensure that the Atlas drone battery is fully charged and new batteries have been installed into the remote control.
Do a complete check of your surroundings making sure there are no hazards in your vicinity.
Turn on the Atlas drone’s power switch and place the drone on a flat, level surface facing away from you.
With the left thumbstick in the neutral middle position, turn on the power switch on the remote control.
Move the left thumbstick down to the lowest position, and then return the thumbstick to the middle position.
The Remote will beep indicating that the connection has been made.
To unlock the motors move both thumbsticks to the lower middle position and hold for 5 seconds.
The motors will then start and the Atlas will be ready for take off.
Q2: Why is my Atlas drone drifting sideways/backward/forwards?
A2: Your Atlas drone may need to be calibrated.
To calibrate your Atlas drone correctly make sure you are launching the drone from a flat, level surface.
Switch on the Atlas drone and the remote control.
Make the connection between the controller and Atlas drone.
Just before you take off, with the Atlas drone still on a flat level surface hold the right thumbstick (Pitch/Roll) in the lower right diagonal position for 5 seconds.
The Atlas drone will now be recalibrated.
To fine tune any drift further use the trimming controls on the remote control to balance any unwanted movement.
Before adjusting trimming settings make sure that the Atlas is not being affected by any outside forces such as wind or drafts.
Q3: How can I get the best footage out of my Atlas drone?
A3: We recommend using a class 10 SD card from a reputable brand. Better quality SD cards will yield better footage.